Silent Monitor (Not For Hipath 500); Monitoring A Room - Siemens OpenStage 60T User Manual

Privacy/security
Step by Step
*944
Room monitor
112

Silent Monitor (not for HiPath 500)

When configured (ask responsible service personnel),
you can join in an on-going call conducted by an internal
user and monitor silently and unnoticed.
Enter the code.
j
Enter your internal station number.

Monitoring a room

You can use a phone to monitor a room. This function
must be enabled on the monitoring phone.
When you call this phone, you can immediately hear
what is happening in that room.
Activating the telephone to be monitored
v
Open the Program/Service menu ! page 40.
Select and confirm the option shown.
You can either leave the telephone in speakerphone
mode or lift the handset and leave it directed towards
the noise source.
Deactivating the telephone to be monitored
v
Press the lit key. The LED goes out.
or
\
Replace the handset.
Monitoring the room
j
Enter the internal station number of the phone located
in the room that you wish to monitor.