Removal From Storage - Victory Motorcycles OCTANE 2017 Rider's Manual

Removal From Storage

1. Verify that tire pressure is at specification.
2. Install a fully charged battery.
3. Perform an electrical inspection.
4. Check the oil level. If the motorcycle was stored in an area subject to wide swings in
temperature and humidity (such as outdoors), change the engine oil before starting the
engine. See page 55.
NOTICE: During storage, temperature and humidity changes can cause condensation to form in the
crankcase and mix with engine oil. Running the engine with oil that contains condensation
can cause engine damage.
5. Inspect the storage area for signs of fluid leaks. Identify and perform service to any
leaking components.
6. Remove any intake or exhaust mesh covers installed for rodent protection.
7. Make sure the fuel tank is at least 3/4 full.
8. Perform the pre-ride inspections. See page 36.
9. Perform a road test. See page 53.
10. Wash and polish the motorcycle. Wax, polish, or apply protectant to appropriate
components.
Cleaning and Storage
93