Victory Motorcycles OCTANE 2017 Rider's Manual page 28

Component Identification
Switches
Turn Signal Switch
Move the turn signal switch to the left to activate the
left turn signals. Move the switch to the right to
activate the right turn signals. A signal ends when
speed or distance reach preset levels. To end a
signal manually, move the switch to the center and
push it inward.
Momentary Feature: Move the turn signal switch
left or right and hold it in that position. The signal
flashes until the switch is released.
Hazard Warning Flashers Switch
Turn Signal Switch
The ignition switch must be in the ON position to
Hazard Warning Flashers Switch
activate the hazard warning flashers, but once
activated, the hazard warning flashers will continue
to flash when the ignition switch is turned off.
When the hazard warning flashers are active, all four turn signals flash.
• Press and hold the hazard warning flashers switch for 1-2 seconds to activate the hazard
warning flashers.
• Press and release the switch to cancel the hazard warning flashers.
Mode Button
The mode button is located on the front side of the
left handlebar controls. With the ignition switch on,
use the mode button to toggle through the modes of
the multi-function display. Use the mode button to
set the display units to either standard or metric
units of measurement. See page 30.
Mode Button
26