Victory Motorcycles OCTANE 2017 Rider's Manual page 63

Fuel System
Fuel Tank Installation
4. Pivot the rear of the tank upward to access the
tank bottom. Support the rear of the tank in
this position.
5. Remove the plug tool from the fuel pump
fitting.
6. Reconnect the fuel supply line connector to
the fuel pump. Make sure you hear a click to
indicate proper engagement. Test the
connection by pulling the fuel line lightly.
7. Connect the fuel pump harness electrical
connector. Make sure you hear a click to
indicate proper engagement.
8. Verify that the fuel line is correctly routed and
secured.
9. Slide the tank forward to make sure it's fully
seated on the isolators.
10. Connect the fuel cap recess drain line.
11. Connect the fuel tank vent line.
12. Reinstall the four (4) rear fuel tank bolts.
Torque: 18 ft-lbs (24.4 Nm)
13. Reinstall the fuel tank filler pad.
14. Prime the fuel pump. See page 46.
15. Check for leaks.
16. Reinstall the seat. See page 76.
Maintenance
Step 7
Step 6
Step 11
Step 11
California Models
Step 10
Step 10
Step 12
61