Victory Motorcycles OCTANE 2017 Rider's Manual page 26

Component Identification
Switches
Left Control
High/Low Light
Switch
Horn Switch
Symbol Switch
Hazard Warning
Flashers Switch
High/Low Headlight
Beam Switch
Horn Switch
Turn Signal Switch
Stop/Run Switch
Starter Switch
24
Turn Signal Switch
Hazard Warning
Flashers Switch
Mode Button
The hazard warning flashers switch activates and cancels the hazard
warning flashers. See page 26.
The high/low headlight beam switch toggles the headlight between
high beam and low beam. See page 25.
To sound the horn, press the horn switch.
Move the switch to the left to activate the left turn signals. Move the
switch to the right to activate the right turn signals. A signal will
deactivate automatically when speed or distance reach
predetermined levels. To cancel a signal manually, move the switch to
the center position and push it inward. Momentary Feature: Move the
turn signal switch left or right and hold it in that position for at least
one second. The momentary feature will activate and the signal will
then cancel when the switch is released.
If a bulb fails, the lamp flashes at more than twice the normal rate.
Press the bottom of the switch (RUN) to allow the engine to start and
run. Press the top of the switch (STOP) to stop the engine. See page
25.
Use the starter switch to start the engine. The engine stop/run switch
must be in the RUN position. See page 25.
Right Control
Engine Starter Switch
Description
Engine Stop/Run
Switch