Special Keys - Phonetics SENSAPHONE EXPRESS II User Manual

Special Keys:

Press the "star" button(*) once to repeat the current menu.
Press the "star" button(**) twice to repeat the previous menu.
Use the "pound" button(#) as the Enter key.
Notes regarding uses of the "Star" Button[*]: During the programming of Phone Contact
Numbers, the "Star" [*] button is the Code Key--i.e., for Code 1 you would press "*1". If, on
the other hand, you are inputting analog tables or alarm limits, if you press the "star" button [*]
before a digit, it acts as a minus [-] sign; if you press the "star" button[*] after a digit, it acts as
a decimal point.
Security:
The unit's local keypad may not be "Unlocked" or "Locked" over the phone. This will not affect
any Phone-in parameters; however, if the local keypad is "Locked" you must know the System
Password to gain access and change programming over the telephone. Press the pound sign (#)
after the password.
Note: The ID message must be recorded after installation. There is no default ID message.
However, it can be recorded over the phone. Just remember that message time limits apply.
(See "Messages" section of Chapter 5.)
Input Calibration cannot be programmed over the phone
®
56 Sensaphone Express II User's Manual