Alarm Reset Time; Dialout Selection; Mute Local Speaker - Phonetics SENSAPHONE EXPRESS II User Manual

If the alarm reset time is programmed to 0 seconds, the
feature is disabled. Express II will not restart the dial out
regardless of how long the alarm exists.
6. Sound Dial Out Selection - You may program Express II
to dial specific phone contacts if a high sound alarm occurs.
This is the Sound Dial out selection. To return to the
default, all contacts, press '9' '9,' and then press ENTER.
7. Mute Local Speaker - When the Express II detects an
alarm, it announces the alarm locally for the duration of the
Call Delay. If the Mute Local Speaker is enabled, it is silent
for that time period. The default is Disabled.

5-Alarm Reset Time:

1) Press 5 for Alarm Reset Time.
2) Enter hours.
Enter minutes.
Enter seconds.

6-Dialout Selection:

1) Return to the Sound Parameters
menu. Press 6 for Dial Out Selec-
tion.
2) Enter the position numbers, (1-48),
of the phone contacts to be called in
the event of a high sound level
alarm.
3) Enter list of dial out selection.
Press individual position numbers.
(1-48)
Press Enter.
4) When all position numbers in list are
entered, press Enter again.
5) The default is all contacts.
Press '9' '9' for the default.

7-Mute Local Speaker:

1) Press 7 for Mute Local Speaker at
the Sound menu.
2) Press 1 to disable.
Press 2 to enable.
Chapter 5: Programming 37