Table of Contents
Advertisement
TONE OR PULSE DIALING
The Sensaphone will normally dial out to a Phone number using pulse. However, you can
switch to Touch-Tone™ by inserting TONE as the first digit of the Phone number.
To set a TONE-dialed Phone number:
1. Press the SET key
2. Press the number key (1-4) of the Phone number you want to set
3. Press the TONE key
The 4100 will beep.
4. Enter the digits of the Phone number using the number keys
The 4100 will recite the digits as you press them.
5. Press ENTER. The 4100 will say "Enter."
When you interrogate, the tone will be represented by a beep at the beginning of the Phone
number. NOTE: TONE is counted as one digit toward the total 32 digits allowed.
SPECIAL DIALING
The Model 4100 has provisions for special dialing sequences. There are three keys that
represent special functions when used within a Phone number. The PAUSE key represents a
4-second pause in dialing. It is used mainly when you must first dial an access number, such
as 9, to reach an outside line. The SET key represents the pound (#) tone and the WHAT IS
key represents the asterisk (*) tone. A pound or asterisk tone may be required when calling
some phone or beeper systems.
To incorporate a PAUSE:
1. Press the SET key
2. Press the number key (1-4) of the Phone number
3. Press the TONE key (if applicable)
The 4100 will beep.
4. Enter the access digit (i.e. 9)
The 4100 will recite the digit.
5. Press the PAUSE key
The 4100 will beep.
6. Enter the Phone number using the number keys
The 4100 will recite the digits as you press them.
7. Press ENTER. The 4100 will say "Enter."
Chapter 3: Communications Programming
(phone number)
(access number)
(phone number)
21
Advertisement
Table of Contents
