Phonetics SENSAPHONE EXPRESS II User Manual page 79

Problem
2. The Express II will
not answer the
telephone when called
for a status report.
3. The Express II will
not answer the tele-
phone when called
back for alarm acknowl-
edgment.
4. The Express II dials
out correctly but fails to
audibly recite its alarm
message when you
answer the call.
®
72 Sensaphone Express II User's Manual
Cause
Check the telephone number
programming. Does your telephone
system require a "9" to connect with an
outside line?
If you are on an older phone system, try
setting the dialing method to "pulse." If
this doesn't work, try setting it to "tone."
(See also "Dial Out Parameters" in
Chapter Five.)
Increase maximum number of calls to a
number greater than or equal to one.
(See Dial Out Parameters)
The Express II must be connected to a
standard (2-wire analog) telephone line,
and NOT a digital extension to a
phone system.
If the unit will not dial out and the
factors previously listed have been
ruled out, try connecting the unit to a
standard residential telephone line and
see if it will operate on that line.
Recheck the programming of "rings until
answer" feature. (See "Dial In
Parameters" in Chapter Five.)
Allow the telephone to ring ten times.
Reprogram voice repetitions to 1 or
greater.
Solution