Installing Input Expansion Cards - Phonetics SENSAPHONE EXPRESS II User Manual

NOTE: All wiring should comply with section 17 of the UL requirements.

INSTALLING INPUT EXPANSION CARDS

To install an input expansion card:
1. Turn the unit off. Damage may occur to the motherboard or to the input card if installed while
power is still on.
2. Working from left to right, loosen the thumbscrews and remove the blank plate of the first
unused slot. See Figure 10 below.
NOTE: Always install cards side by side—do not skip a slot.
3. Hold the card with the LEDs at the top, and line up the DIN connector plug on the card with
the DIN connector socket on the motherboard. See Figure 11.
R
SENSAPHONE
E II
XPRESS
MONITORING SYSTEM
ABC DEF
1 PROGRAM
2 3
PHONE DIAL OUT DIAL IN
GHI JKL MNO
4 5 6 INQUIRE
MESSAGES INPUTS SOUND
PRS TUV WXY
STATUS
7 8 9
POWER OUTPUTS DATA LOG
OPER
CODE
0 ENTER
ALARMS
SYSTEM
LOCK ALARM
HALT DISPLAY
CANCEL
UNLOCK
Phonetics, Inc.
Figure 10: Remove blank plate
Chapter 3: Inputs 15