CAUTION
●
Do not use solvents, wax polish, shoe
cream, stain removers, leather cleaning prod-
ucts or any similar products on Alcantara.
●
To avoid damage, stubborn stains should
be removed by a specialised workshop.
On no account use brushes, hard sponges
●
or similar utensils.
Seat belts
Keep the seat belts clean.
–
For cleaning, use a mild solution of soap
–
and water.
Check the condition of the seat belts at reg-
–
ular intervals.
The retract function may not operate properly
in very dirty belts. Make sure that the inertia
reel seat belts are completely dry before al-
lowing them to retract.
CAUTION
●
Do not remove the seat belts from the vehi-
cle to clean them.
Do not use chemical cleaning agents on the
●
seat belts, as this can damage the webbing.
Ensure that the seat belts do not come into
contact with corrosive fluids.
●
If you find any damage to the belt webbing,
belt fittings, the belt retractor or the buckle,
Intelligent technology
the belt in question must be replaced by a
specialised workshop.
Intelligent technology
Electromechanical steering
Electro-mechanical power steering assists
the driver when steering.
Electro-mechanical power steering adapts
electronically to the speed of the car, torque
and turning angle.
If the power steering should fail at any time
or the engine is switched off (for instance
when being towed), the car can still be
steered. However, more effort than normal
will be required to turn the steering wheel.
Driver warning lamps and messages
(in red) Faulty steering! To
park the vehicle
If the warning lamp remains on and the driver
indication appears, the power steering could
be faulty.
Do not continue driving. Seek specialist as-
sistance.
(in yellow) Steering: System
fault! You may continue driving.
If the warning lamp comes on, the steering
could react with more difficultly or more sen-
sitivity than normal. In addition, when driving
in a straight line the steering wheel may be
off-centre.
»
253