Seat LEON Owner's Manual page 22

Securing child seats with the seat belt
›››
Figure Fig. 30 shows the basic child re-
A
straint system mounting using lower retain-
ing rings and the upper retaining strap. Fig-
›››
ure Fig. 30 shows the child restraint
B
system mounting using the vehicle seat belt.
The seat belt may be used to secure univer-
sal type child seats to the vehicle seats
marked with a U in the table below.
If the front passenger seat lacks a height ad-
justment, child seats cannot be mounted is
1)
this location .
To correctly use a child seat in the back, the
front backrest must be adjusted so that there
1)
Compliance with current national legislation and
the manufacturer's instructions is required when us-
ing or installing child seats.
20
The essentials
is no contact with the child seat in the back
in the case that it goes opposite to the direc-
tion of the car. In the case of front facing re-
straint systems, the front backrest must be
adjusted so that there is no contact with the
child's feet.
To adjust the passenger seat to accommo-
date a child's seat and get the seat belt in a
perfect position, adjust the passenger back-
1)
rest as far forward as possible.
Starting with Group 0+ child seats should not
be mounted facing backwards in the passen-
ger seat given that due to the size of some of
them, they can be difficult to install.
On the rear seats: Possible installations
Fig. 30
for the child seat.
.
1)
.