Seat LEON Owner's Manual page 243

Trailer maximum electricity consumption
Brake lights (total)
Turn signal, on each side
Side lights (total)
Rear lights (total)
Rear fog light
Never exceed the values indicated!
Note
● If the rear lights of the trailer are not cor-
rectly connected, the vehicle electronics may
be damaged.
If the trailer absorbs excessive electric cur-
●
rent, the vehicle electronics may be dam-
aged.
Never connect the trailer's electric system
●
directly to the electrical connections of the
tail lights or any other power sources. Only
use the connections intended for providing
electric current to the trailer.
Towing bracket device
Ball coupling of towing bracket de-
vice*
84 Watts
The ball coupling is provided with instruc-
42 Watts
tions on fitting and removing the ball cou-
100 Watts
pling of the towing bracket.
42 Watts
WARNING
42 Watts
The towing bracket ball coupling must be
stored securely in the luggage compartment
to prevent them being flung through the vehi-
cle and causing injury.
Note
● By law, the ball coupling must be removed
if a trailer is not being towed if it obscures
the number plate.
Driving with a trailer
Turn the 13-pin connector
Fig. 237
Before driving
● Grip the 13-pin connector at area
remove it in the direction of the arrow
›››
Fig. 237.
● Remove the protective cover
upwards.
After driving
● Grip the 13-pin connector at area
insert it in the opposite direction to the arrow
›››
Fig. 237.
›››
● Fit the protective cover
5
the ball coupling.
and
A
›››
Fig. 225
5
and
A
Fig. 225 on
»
241