Parking Aid operation
Centre console: parking aid button.
Fig. 220
Manual connection of Parking Aid
●
Press the button once.
Manual disconnection of Parking Aid
Press the button again.
●
Manual disconnection of Parking Aid display
(the audible sounds remain active)
●
Press a button on the main menu of the fac-
tory-assembled infotainment system.
OR: Press the BACK function button.
●
1)
With certain equipment, the system will be activa-
ted automatically when the vehicle reverses for a cer-
tain distance (about 10 cm if an obstacle is detected
in the rear area and about 20 cm if no obstacle is de-
tected in the rear area).
228
Operation
Automatic connection of Parking Aid
Engage reverse gear or turn the selector
●
lever to position R.
OR: depending on the equipment, if the ve-
●
1)
hicle rolls back
.
OR: If the vehicle approaches an obstacle
●
that is in its forwards path at a speed below
›››
page 229, Automatic ac-
10 km/h (6 mph)
tivation. The obstacle is detected as of a dis-
tance of approx. 95 cm if the automatic con-
nection is activated in the infotainment sys-
tem. A reduced display is shown.
Automatic disconnection of Parking Aid
Move the selector lever to position P.
●
●
OR: accelerate to more than approx.
10 km/h (6 mph) forward.
Temporary suppression of sound in Parking
Aid
●
Press the function button.
Change from reduced view to full view
●
Engage reverse gear or turn the selector
lever to position R.
●
OR: depending on the equipment, if the ve-
hicle rolls back
1)
.
●
OR: press the car icon in reduced view.
If necessary, switch to the rear-assist image
(Rear View Camera "RVC")
Engage reverse gear or turn the selector
●
lever to position R.
OR: Press the RVC function button.
●
A short confirmation signal will be heard and
the button symbol will light up yellow when
the system is switched on.