Seat LEON Owner's Manual page 139

The light distribution that the halogen and
full-LED headlights of the SEAT Leon range
have allows the specific "tourist light" values
to be met without the need for stickers or
changes in the settings.
Note
"Tourist light" is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Headlight range control, lighting of
the instrument and control panel
Fig. 140 Next to the steering wheel: Head-
light range control
Lights and visibility
Lighting of the instrument panel, screens
and controls*
Depending on the model, lighting of the in-
strument panel and controls can be adjusted
in the Easy Connect system, using the button
and the function button
SETUP

›››

page 27.
Headlight range control
The headlight range control is modified ac-
cording to the value of the headlight beam
and the vehicle load status. This offers the
driver optimum visibility and the headlights
do not dazzle oncoming drivers
The headlights can only be adjusted when
the dipped beam is switched on.
›››
Fig. 140:
To reset, turn switch
a)
Value Vehicle load status
Two front occupants, luggage compart-
–
ment empty
All seats occupied, luggage compartment
1
empty
All seats occupied, luggage compartment
2
full With trailer and minimum drawbar load
Driver only, luggage compartment full With
3
trailer and maximum drawbar load
a)
If the vehicle load does not correspond to those shown in the
table, it is possible to select intermediary positions.
OR:
Using the radio menu (see Easy Connect
> Adjusting Lights > Headlamp
height adjustment
Two front occupants, luggage compart-
Setting 0
ment empty
All seats occupied, luggage compart-
Setting 1
ment empty
All seats occupied, luggage compart-
Setting 2 ment full. With trailer and minimum
drawbar load
Driver only, luggage compartment full.
Setting 3
With trailer and maximum drawbar load
›››
.
Dynamic headlight range control
The control is not mounted in vehicles with
dynamic headlight range control. The head-
light range is automatically adjusted accord-
ing to the vehicle load status when they are
switched on.
Instrument panel lighting
With the ignition on and without light activa-
tion, the instrument panel lighting remains
activated in daytime light conditions. The
lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the  function
active, the instrument panel lighting may
even switch off. The objective of this function
›››

page 27).
»
137