Seat LEON Owner's Manual page 200

Indications on the display, warning
and control lamps
Fig. 198 On the instrument panel display: (A)
ACC temporarily inactive, vehicle detected in
front, temporary distance adjusted. (B) ACC
active, vehicle detected in front, temporary
distance adjusted.
Status display
Indications on the display
Vehicle in front, the ACC is inactive.
1
198
Distance margin selected, the ACC is in-
2
active.
Vehicle detected in front. The ACC is ac-
3
tive.
Adjustment of the temporary distance
4
from the vehicle in front with a program-
med speed.
Temporary distance adjustment from the
5
vehicle in front with a programmed
speed.
Warning and control lamps
›››
in Warning and control lamps on
page 109.

Brake! apply the foot brake! Driver intervention prompt.

With the vehicle stationary, switch off the engine and
start it up again. Check the radar sensor visually for dirt,
ice or knocks. If it is still unavailable, refer to a special-
ised workshop to have the system inspected.
a) The symbol on the instrument panels with colour display is in
colour.
›››
Fig. 198:
Operation
The speed reduction by the ACC to
maintain the distance from the vehi-
cle in front is not sufficient.
The ACC is not currently available.
 The ACC is active.
No vehicle is detected in front. The programmed speed
remains constant.
If the symbol is white: the ACC is ac-

tive.
A vehicle in front has been detected. The ACC adjusts
speed and distance from the vehicle in front.
If the symbol is grey: the ACC is not

active.
The system is switched on, but is not adjusting.
 It lights up green
The ACC is active.
Some warning and control lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
a)
WARNING
Observe the safety warnings
and control lamps on page
Note
When the ACC is connected, the indications
on the instrument panel screen may be con-
cealed by warnings from other functions,
such as an incoming call.
›››
in Warning
109.