Seat LEON Owner's Manual page 137

● Activated for any position of the rotary light
switch.
● When the car door is opened, the "Coming
Home" lighting comes on. The headlights are
turned off 60 seconds after the vehicle door
is opened.
Deactivation
If no door has been closed, they go out au-
●
tomatically after 60 seconds.
After the last door has been closed, the
●
headlights will be switched off after the
"Coming Home" delay (as established in the
radio menu) has elapsed.
● On turning the light switch to position 
›››

page 24.
● When the ignition is switched on (when
starting the engine).
Function "Leaving Home"
The "Leaving Home" function is only availa-
ble for vehicles with a light and rain sensor
(rotary light switch in position ).
This function may be connected/disconnec-
ted through the radio menu. The "Leaving
Home" function switch-off delay may also be
set (default: 30 sec).
Lights and visibility
Vehicle with
In the "Leaving Home" function, the day-
halogen time running lights (DRL), the rear side
headlights lights and the licence plate lights are
switched on.
Vehicle with In the "Leaving Home" function, the dip-
full-LED ped beams, the daytime running lights
headlights (DRL), the rear side lights and the li-
cence plate lights are switched on.
Activation
● When the vehicle is unlocked using the re-
mote control.
● The "Leaving Home" function is only activa-
ted when the rotary light switch is in position
 and the light sensor detects darkness.
Deactivation
● When the "Leaving Home" delay period
ends (default: 30 sec).
● When the vehicle is locked using the re-
mote control.
● When the light control is switched into a
position other than .
● With the ignition is switched on.
Hazard warning lights

Fig. 139 Dash panel: switch for hazard warn-
ing lights.
Read the additional information carefully
›››

page 25
The hazard warning lights are used to draw
the attention of other road users to your vehi-
cle in emergencies.
If your vehicle breaks down:
1. Park your vehicle at a safe distance from
moving traffic.
2. Press the button to switch on the hazard
›››
warning lights .
3. Switch the ignition off.
4. Apply the handbrake.
5. For a manual gearbox, engage 1st gear;
for an automatic gearbox, move the gear
lever to P.
»
135