Seat LEON Owner's Manual page 102

The rear lid must be open to change the
bulbs.
Remove the rear lid cover in the direction
–
›››
indicated Fig. 115.
Turn the bulb holder anti-clockwise in the
–
direction of the arrow
Remove the bulb holder from its housing
–
.
2
Replace the defective bulb and return the
–
bulb holder to its housing, following the
same steps in reverse order.
Check that the new bulb works properly.
–
Changing number plate light bulbs
In the rear bumper: number plate
Fig. 117
light.
100
›››
Fig. 116.
1
Fig. 118
holder.
Follow the steps indicated:
1. Press the number plate light in the direc-
tion of the arrow
2. Remove the number plate bulb slightly.
3. In the connector lock, turn
wards the arrow
tor.
4. Rotate the bulb holder in the direction of
arrow
5. Replace the defective bulb with a new
bulb with the same features.
6. Insert the bulb holder in the number plate
light and turn in the opposite direction of
arrow
7. Plug the connector into the bulb holder.
Emergencies
Number plate light: Remove the bulb
›››
Fig. 117.
›››
Fig. 118
and pull the connec-
1
and extract it with the bulb.
2
until it stops.
2
Note
Depending on how equipped the vehicle is,
the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
to-