Seat LEON Owner's Manual page 232

Hide thumbs Also See for LEON:
Table of Contents

Advertisement

Moreover, with the SEAT Media System
Plus/Navi System radios, a yellow trail indi-
cates the vehicle's expected journey based
on the steering wheel angle.
Whenever the obstacle is located in the vehi-
cle's direction of travel, the corresponding
audible warning will sound.
As the vehicle approaches an obstacle, the
segments are displayed closer to the vehicle.
When the penultimate segment is displayed,
this means that the vehicle has reached the
collision zone. In the collision zone, the ob-
stacles are represented in red, including
those out of the path. Do not continue to
move forward (or backward)
information on page
226,
formation on page 226
!
Adjusting the display and audible
warnings
The settings for the display and audible
warnings are controlled via the Easy Con-
nect*.
Automatic activation
– activates the Automatic activa-
 on
›››
tion
option
page
229.
– deactivates the Automatic ac-
 off
›››
tivation
option
page
230
Front volume*
Volume in the front and rear area.
Front sound settings/sharpness*
Frequency (tone) of the sound in the front
area.
Rear volume*
Volume in the rear area.
Rear sound settings/sharpness*
Frequency (tone) of the sound in the rear
area.
›››
in General
Adjust volume
›››
in General in-
With the parking aid switched on, the active
audio/video source volume will be reduced
to the intensity of the selected setting.
Error messages
When the Parking Aid is activated or when it
is switched on, if a message reporting a Park-
ing aid error is displayed on the instrument
panel, there is a fault in the system.
If the fault doesn't disappear before discon-
necting the ignition, next time that parking
aid is engaged in reverse, it will not be indi-
cated.
229.
Operation
Parking System Plus*
If there is a fault in the parking aid system a
message will appear on the instrument panel
indicating the error. In addition the  key
LED will blink.
If there is a fault in a sensor, the symbol  is
displayed on the Easy Connect display in
front of/behind the vehicle. If a rear sensor is
faulty, only the obstacles in the areas
›››
are displayed
Fig.
219. If a front sensor
B
is faulty, only the obstacles in the areas
and
are displayed.
D
Have the fault corrected by a specialised
workshop without delay.
Towing bracket
In vehicles equipped with a towing bracket
device from the factory, when the trailer is
connected electrically, the Parking Aid rear
sensors will not be activated when reverse
gear is engaged, when the selector lever is
turned to position R or when the button  is
pressed.
Parking System Plus
The distance to possible obstacles at the rear
of the vehicle will not be displayed on the
screen and nor will it be indicated by means
of audible sound signals.
and
A
C

Advertisement

Table of Contents
loading

Table of Contents