Introduction - Martin Extube User Manual

Introduction

Thank you for selecting an Extube™, a compact LED-based
color-changing lighting fixture from Martin™. The Extube is available in
short 300 mm (11.8 inch) and long 1200 mm (47.2 inch) models. All
models can be plugged into each other end-to-end to form an unbroken
line of light. Each 300 mm fixture or 300 mm segment of a 1200 mm
fixture can be considered as one pixel that can be controlled separately
via DMX, or fixtures and segments can be controlled together as a group.
Diffuser filters that give wider beam angles are available.
This product features:
• Philips Rebel high-power LEDs
• RGBW (red, green, blue, white) color mixing, with RGB, RGBW, HSIC
(hue, saturation, intensity, color temperature) and HSI color control
options
• 100 W LED power and 1392 lumens total output (at very narrow beam
angle) from 1200 mm models
• 25 W LED power and 348 lumens total output (at very narrow beam
angle) from 300 mm models
• Four models available: one Very Narrow beam angle model with no
diffuser fitted, and Narrow, Medium and Wide beam angles with
corresponding diffuser filters installed
• DMX 512A control
• Remote configuration over the DMX data link using a PC with Martin
MUM software and a hardware interface (Martin DABS1 recommended)
• Cascading auto-addressing (automatic DMX address setting of fixtures
connected to the master fixture)
• Auto-sensing power supply unit with 100 - 120/200 - 240 V, 50/60 Hz
operating range
• Clamp mounting system on standard
• Rapid end-to-end connection system
For the latest firmware updates, documentation, and other information
about this and all Martin Professional products, please visit the Martin
website at http://www.martin.com
Introduction 9