KERN AEJ-C Operating Manual page 105

After setting the target weight /± tolerance the weighing balance will be ready
for dosing.

Tare, as required and dose weighing load.
The indicators <MIN>, <OK> or< MAX> show the filling status.
Sample display
• The target weight / ± tolerance will be saved until new values are defined.
• To delete, set value to [0.000 g].
• Return to weighing mode, see chap. 17.2.1
AEJ-C/AES-C/PLJ-C-BA-e-1621
State
Weighing load below the set target weight /
tolerance
Target weight reached and within the set
tolerance
Load above set target weight / tolerance
105