National Instruments RMX-4120 User Manual page 68

CF46 IP Address Subnet Mask Prefix Setting
If you want to set the IP address manually (MANUAL IP function), set the subnet mask prefix.
This parameter is displayed and can be set only when the LAN interface is in use.
This parameter is applied when you turn the POWER switch off and on or when you execute
APPL with CF40.
Parameter Number
CF46
Examples:
CF47 SCPI-RAW Protocol TCP Port Number Setting
Set the TCP port number of the SCPI-RAW protocol for when the LAN interface is in use.
This parameter is applied when you turn the POWER switch off and on or when you execute
CF40. TCP port number 4880 cannot be used.
Value
4000 to 9999
(except 4880, 5024, and 5044)
RMX Programmable Power Supplies User Manual
Value
16 to 31
Display example when "16" is set
Display example when "24" is set
Display example when "31" is set
Parameter Description
TCP port number (factory default setting: 5025)
Description
Sets the subnet mask prefix.
255.255.0.0
255.255.255.0
255.255.255.254
© National Instruments | 2-37