National Instruments RMX-4120 User Manual page 67

Chapter 2 Basic Functions
This parameter is applied when you turn the POWER switch off and on or when you execute
APPL with CF40.
If the LAN interface settings are reset (CF40: LCi/dEF) this is set to (110).
Value/Display
_ _¯
_¯_
_¯ ¯
¯_ _
¯_¯
¯ ¯_
¯ ¯ ¯
CF42 to CF45 Manual IP Address Setting (Manual IP Function)
If you do not want to or cannot use a DHCP server or if you do not want to or cannot use the
AUTO IP function, set the IP address manually. This parameter is displayed and can be set only
when the LAN interface is in use.
These parameters are applied when you turn the POWER switch off and on when you execute
APPL with CF40.
Parameter Number
CF42
CF43
CF44
CF45
2-36 | ni.com
DHCP:OFF, AUTO IP: OFF, MANUAL IP: ON
DHCP:OFF, AUTO IP: ON, MANUAL IP: OFF
DHCP:OFF, AUTO IP: ON, MANUAL IP: ON
DHCP:ON, AUTO IP: OFF, MANUAL IP: OFF
DHCP:ON, AUTO IP: OFF, MANUAL IP: ON
DHCP:ON, AUTO IP: ON, MANUAL IP: OFF
(factory default setting)
DHCP:ON, AUTO IP: ON, MANUAL IP: ON
Value
0 to 255
0 to 255
0 to 255
0 to 255
Parameter Description
Description
Sets the first IP address number.
Sets the second IP address number.
Sets the third IP address number.
Sets the fourth IP address number.