Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 49

■Wiring process of SSCNET cable
Put the SSCNET cable in the duct or fix the cable at the closest part to the Simple Motion module with bundle material in order
to prevent SSCNET cable from putting its own weight on SSCNET connector. Leave the following space for wiring.
• Putting in the duct
Top of panel or wiring duct
Simple Motion module
50 mm (1.97 inch) or more
• Bundle fixing
Optical cord should be given loose slack to avoid from becoming smaller than the minimum bend radius, and it should not be
twisted. When laying cable, fix and hold it in position with using cushioning such as sponge or rubber which does not contain
plasticizing material.
Panel
DIN rail
50 mm (1.97
inch) or
more
Panel
70 mm (2.76
inch ) or
more
50 mm (1.97 inch) or more
Simple Motion module
Bundling material
Recommended product
NK clamp SP type (NIX, INC.)
100 mm (3.94
inch) or more
Optical cord
Loose slack
Cable
5.1 Precautions for Wiring
5
5 WIRING
47