Contents Of Package - Rikon Power Tools 30-240 Operator's Manual

20” floor drill press

Hide thumbs Also See for 30-240:

Table of Contents

Model #30-240 20" Floor Drill Press is shipped complete in one box.

Unpacking and Clean-up

1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to

make sure that all of the items are accounted for, before discarding any packing material. Place parts on a

protected surface for easy identification and assembly. If any parts are missing or broken, please call RIKON

Customer Service (877-884-5167) as soon as possible for replacements. DO NOT turn your machine ON if

any of these items are missing. You may cause injury to yourself or damage to the machine.

2. Report any shipping damage to your local distributor.

3. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use;

gasoline, paint thinner, mineral spirits, etc. These may damage painted surfaces.

4. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth.

5. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is

running properly.

Item

Part Name

Motor & Head Assembly (*)

Table Crank Handle

Locking Lever Handle

5/8" Keyed Chuck & Key

Feed Handles (3)

Column Assembly

Table Assembly