Brake Fluid Level Inspection; Brake Pad Inspection - Yamaha SRX700D Service Manual

Hide thumbs Also See for SRX700D:

Table of Contents

BRAKE FLUID LEVEL INSPECTION/

BRAKE FLUID LEVEL INSPECTION

1. Place the machine on a level surface.

For a correct reading of the brake fluid level, make

sure that the top of the handlebar brake master

cylinder reservoir is horizontal.

Brake fluid may corrode painted surfaces or plas-

tic parts. Always clean up spilled fluid immedi-

Use only the designated brake fluid. Other flu-

ids may deteriorate the rubber seals, causing

leakage and poor brake performance.

Refill with the same type of fluid. Mixing fluids

may result in a harmful chemical reaction lead-

ing to poor brake performance.

When refilling, be careful that water does not

enter the brake master cylinder reservoir. Wa-

ter will significantly lower the boiling point of

the fluid and may cause vapor lock.

BRAKE PAD INSPECTION

1. Apply the brake lever.

Fluid level is under the "LOWER" level line

a → Fill to the proper level.

Recommended brake fluid:

Wear indicator 1 nearly contacts the brake

disc → Replace as a set.

Wear limit a:

4.7 mm (0.19 in)