Brake Fluid Level Inspection - Yamaha FX10X Service Manual

BRAKE PAD INSPECTION/BRAKE HOSE INSPECTION

BRAKE FLUID LEVEL INSPECTION/

• Use only the designated brake fluid. Other flu-
• Refill with the same type of fluid. Mixing fluids
• When refilling, be careful that water does not
BRAKE PAD INSPECTION
a
1
BRAKE HOSE INSPECTION
2-34
WARNING
ids may deteriorate the rubber seals, causing
leakage and poor brake performance.
may result in a harmful chemical reaction
leading to poor brake performance.
enter the brake master cylinder reservoir.
Water will significantly lower the boiling point
of the fluid and may cause vapor lock.
1. Remove:
• Right side cover
Refer to "COVERS" in CHAPTER 3.
2. Apply the brake lever.
3. Inspect:
• Brake pad wear limit a
Wear indicator groove 1 almost disappeared
→ Replace as a set.
Wear limit:
1.5 mm (0.06 in)
1. Inspect:
• Brake hose
Cracks/damage/wear → Replace.
2. Check:
• Fluid leakage
Apply the brake lever several times.
Fluid leakage → Replace the defective parts.
INSP
ADJ