Ac Magneto Installation - Yamaha SRX700D Service Manual

AC MAGNETO
INSTALLATION
NOTE:
After installing all parts, refer to "CABLE ROUT-
ING" in CHAPTER 9, to check the cable, lead and
hose routings.
1. Install:
•
Woodruff key 1
CAUTION:
Be sure to remove any oil or grease from the
tapered portion of the crankshaft using a cloth
dampened with thinner.
NOTE:
Pass the magneto leads through the hole and
install the grommet in the crankcase.
SDN5540 2. Install:
•
Magneto rotor
•
Washer
•
Nut (magneto rotor)
CAUTION:
Be sure to remove any oil or grease from the
tapered portion of the magneto rotor using a
cloth dampened with thinner.
NOTE:
When installing the magneto rotor, make sure the
woodruff key is properly seated in the keyway of
the crankshaft.
3. Tighten:
Starter pulley bolt 1:
Magneto rotor nut 2:
NOTE:
Attach the primary sheave holder to hold the
primary sheave.
Primary sheave holder:
SDN5550
5-25
ENG
23 Nm (2.3 m • kg, 17 ft • lb)
110 Nm (11 m • kg, 80 ft • lb)
90890-01701, YS-01880