Figure 5-2
Edit the Fluids List (or right click within the Fluids Table)
5-3 Edit the well plate
Once the fluid table is set up with at least one compound, Edit Well Plate operations such as adding
fluids to the wells may begin. To see the Edit Well Plate menu options, click on Edit/Well Plate or
select some wells in the well plate image and right-click. As shown in
options are available:
○
Select or Deselect All Wells
○
Set Titration (see
○
Set Concentration or Set Volume (see
○
Normalize (see ―Normalize‖)
○
Randomize (see ―Randomize‖)
○
Remove a single fluid and remove all fluids
○
Cut, Copy, Paste, and Paste Special (see
○
Clear Well Plate
○
Plate Layout Wizard (see
TIP:
This menu can also be accessed by clicking Edit and then Well Plate after selecting a
well or wells in the well plate image.
―Set concentrations or volumes in
―Set concentrations or volumes in
―Plate Layout Wizard
HP D300 Digital Dispenser
Figure
wells‖, step 3 )
―Use the Paste Special dialog
basics‖)
5-3, the following
wells‖, Step 1)
box‖)
33