Aux Input Operation; Aux In Mode - Goodmans MICRODAB16BT User Manual

AUX Input Operation

Aux In Mode

4.30
It is possible to connect an external audio source like an MP3
player using a 3.5mm audio cable (not supplied).
1. Connect one end of the cable to the AUDIO devices
headphone /Line output and the other end to the AUX
INPUT input on the front of the MICRODAB16BT.
2. Press the SOURCE button until you reach the AUX MODE
option or press the AUX IN button on the remote control.
3. Adjust the volume to your desired level.
The volume output is affected by the volume level on the
source EG: MP3 player so make sure that is set to about
70-80% (not too loud to avoid distortion).
STANDBY
SOURCE PLAY/PAUSE STOP PREV NEXT
ENTER
EJECT
AUX IN
MICRODAB16BT