REMOTE CONTROLLER
You can control the system with the provided remote controller. Slide open and insert two (AA / UM3) batteries
correctly so that the + and – polarities match the polarity diagrams inside the battery compartment.
When the batteries are exhausted, the remote will no longer operate the system. Replace both batteries with
new ones.
When the remote is not to be used for a long time, remove the batteries to avoid damage caused by battery
leakage and corrosion.
Avoid keeping the remote in extremely hot or humid locations.
Between remote controller and remote sensor there should be on no obstacles in the way. The remote range
is approx 8 Metres.
REMOTE CONTROL FUNCTIONS
1.
P-MODE BUTTON
2.
PROGRAM BUTTON
3.
NUMERIC BUTTONS
4.
--- BUTTON
5.
BATTERY COMPARTMENT
6.
FOLDER+ BUTTON
7.
SKIP FORWARD BUTTON
8.
SKIP BACKWARD BUTTON
9.
STOP BUTTON
10. PLAY/PAUSE BUTTON
POWER SUPPLY
BATTERY OPERATION
1.
(Batteries are not supplied)
– REMOVE
THE
DOOR.
– INSERT 8 PIECES UM-2 (C SIZE) BATTERIES
INTO THE BATTERY COMPARTMENT WITH
BATTERY
POLARITY
INDICATED.
NOTE: WE RECOMMEND
ALKALINE BATTERIES.
– CLOSE THE BATTERY COMPARTMENT DOOR.
AC OPERATION
2.
- PLUG THE AC LINE CORD INTO ANY
NORMAL HOUSEHOLD AS MAINS OUTLET IN
CORRECT VOLTAGE AND THE MAINS SOCKET.
- THE BATTERIES WILL BE AUTOMATICALLY
DISCONNECTED.
- FOR MAINS OPERATION CONNECT THE
SUPPLIED AC CORD TO THE AC SOCKET
ON THE LEFT REAR OF THE UNIT.
CONNECT THE 3 PIN MAINS PLUG TO A
3 PIN 230VAC MAINS SOCKET.
BATTERY
COMPARTMENT
POSITIONED
THE USE OF
AS
4