MICRO 1103 MICRO SYSTEM CD FM/MW RADIO INSTRUCTION MANUAL Before operating this unit, please read this Owners manual carefully. Goodmans product information helpline: 0870 873 0080...
IMPORTANT NOTES INTRODUCTION This instruction manual is important to you. Please read it. In a short time it shows exactly how to connect, operate, and adjust this unit for best performance. Your hearing is very important to you and to us so please take care when operating this equipment.
CAUTION IMPORTANT SAFEGUARDS CLASS 1 LASER PRODUCT PRE FITTED MAINS PLUGS Use of contents or adjustments of performance of procedures other than those specified For your convenience a mains plug has been fitted to this appliance. For your safety please Herein may result in hazardous radiation exposure.
19. AUX INPUT SOCKET LOCATION OF CONTROLS NOTE: CD DOOR WILL ONLY • For connection of external 9. SLEEP/TIMER Key OPEN/CLOSE WHEN IN CD MODE sound sources. • Activate or deactivate timer 20. SPEAKER SOCKET or sleep. 21. SELECTOR SWITCH 10.
DISPLAY REMOTE CONTROL CONNECTION • Do not switch the power to the unit on until all connections are made. • Unravel and position the FM aerial lead away from the power and speaker cords as these could generate noise. Do not position the FM aerial lead so that it touches the rear of the unit.
SETTING THE CLOCK SPEAKER CORD CON- SWITCHING THE UNIT ON NECTION AND OFF 1. Press DISPLAY/REMAIN unit the clock is shown on the display. Press the power button to turn the unit 2. Press and hold the MEMORY/ CLK-ADJ until `24H`flashes on display.
3. To pause playback, press PLAY/ The tracks will be displayed on the COMPACT DISCS PAUSE LCD. 4. To resume play, press PLAY/ • Use a blower (available from camera 1. Always use compact discs bearing PAUSE again. PLAYING A PROGRAM stores) to blow dust off the lens.
TUNER OPERATION 6. Repeat this procedure to store REPEAT PLAY other frequencies and preset To listen to a disc or track over and In Other Mode: in the memory. over again. Press MODE/REMAIN to change TUNING 1. Press M-UP/REPEAT. display information as follows: 1.
TIMER OPERATION CONNECTING AN EXTER- Before setting the timer, make sure NAL AUDIO SOURCE To cancel the Timer press the the clock is correctly set. Timer Button on the Remote. TIMER ON SETTING RCA JACK Press CD, TUNER to select the desired sound source.
TROUBLESHOOTING GUIDE TECHNICAL SPECIFICATIONS Please make these simple checks before calling our helpline. These tips can save you time Power Supply AC power and money. Output Power (Per Channel): 12.5 watts RMS into 4 ohm NO POWER • Make sure the power cord is inserted fully into Power Consumption a 230V/50Hz outlet.