Table of Contents
Advertisement
CD Operation
Programmed Playback
4.03
To programme an alternative playback order of tracks follow
the below steps.
1. Press the
PROG. button to enter the programme setup function.
2. Use the
3. Press the PROG. button to store track '1' of the playlist.
4. Repeat steps 2-3 to program up to 20 tracks.
5. When complete press the
6. To cancel the program sequence press the
twice.
4.04
Repeat Single/All Track(s)
1. During playback pressing the REPEAT button will flag the
current track to repeat indefinitely. You will see 'REP-1' on
the display.
2. Pressing the REPEAT button again will repeat all tracks on
the disc. You will see 'REP-ALL' on the display.
3. To cancel the repeat function press the REPEAT button for
a third time. You will see 'DISC' on the display.
Random Playback
4.05
1. Press the RANDOM button on the remote control. The CD
contents will be played once in a random order. You will see
'RANDOM' on the display.
2. To cancel the random operation press the RANDOM button
again. You will see 'DISC' on the display.
Numeric Buttons
4.06
While listening to a CD a specific track number can be played
by pressing the relative digit on the number buttons.
STOP button if a disc is playing. Then press the
/
buttons to skip between the tracks.
button to begin playback.
STOP button
MEMORY P-01
T-000
REP-ALL
CD
Track 01
02:44
RANDOM
CD
Track 01
02:44
MICRODAB16BT
Advertisement
Table of Contents
