Necchi Supernova Instructions Manual page 83

C 5 7 6 2
Fig. 75
Unscrew fully the conical screw No. 58 at the lower end of this
connecting rod.
Loosen the screws No. 048080 GEB that fasten the feed eccen
tric No. 20026 to the upper shaft.
Move the eccentric No. 20026 (together with the connecting
rod No. D 85506) toward the left, along the upper shaft, until
the connecting rod is disengaged from the stitch length re
gulating mechanism and can be taken out from below the
machine.
83
Copyright -2004