Tape / Ink Advance - Avery Dennison snap 500 Operator's And Service Manual

86

9.2 Tape / Ink Advance

Problem
Tape or ink does not
advance when the
start button is
depressed.
Tape tracks inward or
outward while printing

Classification: Avery Dennison - Public
Probable Cause
1) No batches to be printed.
(Data light is not on.)
2) An interlock condition exists.
(Supply or Error light is on.)
3) Tape is bound.
4) Ink is bound.
1) Stock Arbor Tension too low
2) Feed Assembly Alignment
Incorrect
3) Feed Assembly Damage
IF THE RECOMMENDED CORRECTIVE ACTIONS DO NOT
RESOLVE THE PROBLEM (S), CONTACT YOUR LOCAL
AVERY DENNISON REPRESENTATIVE.
User's Manual—SNAP™ 500 Gen 1 and Gen 2
Corrective Action
1) Download batch (If batch downloaded uses
the same design as a previously
downloaded batch, the machine will start
automatically).
1) Press the voice button to determine the
error.
2) If using PCMate Platinum, check the virtual
control / display.
3) If using the Remote Control / Display
Module, view error message.
1) Remove and rethread the tape.
1) Remove and rethread the ink.
1) See Section 6.5