Supply List; Replacement Rotor Parts - Beckman Coulter SX4400 Instructions For Use Manual

• reason for the return,
• original purchase order number, billing number, and shipping number, if possible,
• name and email address of the person to be notified upon receipt of the rotor or accessory at
the factory,
• name and email address of the person to be notified about repair costs, etc.
To protect our personnel, it is the customer's responsibility to ensure that all parts are free from
pathogens and/or radioactivity. Sterilization and decontamination must be done before returning
the parts. Smaller items (such as tubes, bottles, etc.) should be enclosed in a sealed plastic bag.
All parts must be accompanied by a note, plainly visible on the outside of the box or bag, stating that they
are safe to handle and that they are not contaminated with pathogens or radioactivity. Failure to attach
this notification will result in return or disposal of the items without review of the reported problem.
Use the address label printed on the RGA/RMA form when mailing the rotor and/or accessories.
Customers located outside the United States should contact their local Beckman Coulter office.

Supply List

NOTE
Publications referenced in this manual can be obtained at www.beckmancoulter.com or by calling
Beckman Coulter at 1-800-742-2345 in the United States, or by contacting your local Beckman Coulter
office.
Call Beckman Coulter Sales (1-800-742-2345 in the United States) for detailed information on
ordering parts and supplies. For your convenience, a partial list is given below.

Replacement Rotor Parts

SX4400 rotor assembly (includes 4 buckets without covers)
Bucket covers (set of 4)
Buckets (set of 2)
Rotor yoke
Bucket O-ring (set of 4)
Tie-down screw
T-handle rotor wrench
B01198AB
SX4400 Swinging Bucket Rotor
Supply List
B01425
392266
B01426
B01429
392621
361367
365636
15