Appendix C LEDs
The S7508E-X switch provides various LEDs for you to check the status of the relevant modules.
shows the supported LEDs.
Table 34 LEDs of the S7508E-X switch
LEDs
MPU LEDs
•
Management Ethernet interface status LEDs
•
Fan LEDs
•
Card LEDs
•
MPU active/standby status LED
LPU LEDs
•
RJ-45 Ethernet interface status LED
•
SFP interface status LED
•
SFP+ interface status LED
•
XFP interface status LEDs
•
QSFP+ interface status LEDs
•
CFP interface status LEDs
•
EPON interface status LED
Switching fabric module LEDs
Fan tray LEDs
Power module LEDs
MPU LEDs
The MPU model supported by the S7508E-X switch is LSQ1SUPA0 (LSQM1SUPA0).
Figure 39 LEDs on an LSQ1SUPA0 (LSQM1SUPA0)
(1) Management Ethernet interface status LEDs
(3) Card status LEDs
Management Ethernet interface status LEDs
The LSQ1SUPA0 (LSQM1SUPA0) provides management Ethernet interface status LEDs (LINK and ACT)
to indicate the link status and data forwarding status of the management Ethernet interface.
(2) Fan status LEDs
(4) MPU active/standby status LED
78
Table 34