Transceiver Modules - H3C S7508E-X Installation Manual

Transceiver modules

The switch supports transceiver modules. You can order transceiver modules according to the transceiver
modules supported by the LPU interfaces. For more information, see
The switch supports the following transceiver modules:
CFP modules listed in
•
• QSFP+ modules listed in
QSFP+ cables listed in
•
QSFP+ to SFP+ cables listed in
•
10-Gigabit XFP modules listed in
•
10-Gigabit SFP+ modules listed in
•
• 10-Gigabit SFP+ cables listed in
Gigabit SFP modules listed in
•
100-Mbps SFP modules listed in
•
EPON modules listed in
•
Table 23 CFP module specifications
CFP module
LSUM1CFP0
Table 24 QSFP+ module specifications
QSFP+
module
LSUM1QSF
P0
Table 25 QSFP+ cable specifications
Model
LSWM1QSTK0
LSWM1QSTK1
LSWM1QSTK2
Table 23
Table 24
Table 25
Table 26
Table 30
Table 32
Central
Connector
wavelength
1310 nm LC
Central
Connector
wavelength
850 nm MPO
Cable length
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.40 ft)
Table 27
Table 28
Table 29
Table 31
Cable specifications
9/125 μm single-mode fiber
Cable
specifications
50/125 μm
multi-mode OM3
fiber
Data rate
40 Gbps
70
Table 20.
Maximum
transmission
distance
10 km (6.21
miles)
Maximum
Modal
transmission
bandwidth
distance
100 m (328.08
2000 (MHz*km)
ft)
Description
Used for connecting 40-G QSFP+
ports