Switching Fabric Modules - H3C S7508E-X Installation Manual

LPU
LSQ1TGX8S
D0
LSQ1GP24TE
B0
LSQ1GP48E
B0
LSQ1TGX2EB
0
LSQ1TGX4EB
0
NOTE:
A combo interface is a logical port that comprises an SFP interface and an RJ-45 Ethernet interface.
•
Only one of them can be activated at a time.
The S7508E-X switch does not support PoE function.
•

Switching fabric modules

CAUTION:
The switching fabric module of an S7508E-X switch provides a console port, which is designed for the
H3C Technical Support to maintain the switch. Do not use the console port if you have not been trained for
that.
A switching fabric module is the core of the switching fabric of an S7508E-X switch. The S7508E-X switch
supports switching fabric modules of models LSQ1FAB08A0 (LSQM1FAB08A0) and LSQ1FAB08B0
(LSQM1FAB08B0). You must install at least one switching fabric module to a chassis. You can install four
switching fabric modules at most.
Description Connector
8-port 10-Gigabit
optical Ethernet
LC
interface card (XFP,
LC)
16-port Gigabit
optical Ethernet
LC
interface (SFP, LC) +
8-port Gigabit
combo interface
RJ-45
card
48-port enhanced
Gigabit optical
LC
Ethernet interface
card (SFP, LC)
2-port 10-Gigabit
optical Ethernet
LC
interface card (XFP,
LC)
4-port 10-Gigabit
optical Ethernet
LC
interface card (XFP,
LC)
Number Interface
of transmission
interfaces rate
8 10 Gbps
24 1000/100 Mbps
10/100/1000
8
Mbps
48 1000/100 Mbps
2 10 Gbps
4 10 Gbps
68
Available
transceiver
modules
10-Gigabit XFP
module
•
Gigabit SFP
module
•
100-Mbps SFP
module
N/A
•
Gigabit SFP
module
•
100-Mbps SFP
module
10-Gigabit XFP
module
10-Gigabit XFP
module