Appendix B Frus And Compatibility Matrixes; Mpus; Lpus - H3C S7508E-X Installation Manual

Appendix B FRUs and compatibility matrixes

MPUs

The main processing unit (MPU) is the core of the control management plane for the S7508E-X switch.
The S7508E-X switch supports the MPU model LSQ1SUPA0 (LSQM1SUPA0). The S7508E-X switch
supports two MPUs. You can order one or two LSQ1SUPA0 (LSQM1SUPA0) supervisor engines as
needed.
NOTE:
The model of a card is LSQM-prefixed on the card package and LSQ-prefixed on the card panel. For
example, LSQ1SUPA0 and LSQM1SUPA0 identify the same card. When you order a card, refer to the
card by its LSQM-prefixed model. In this chapter, the card models are LSQ-prefixed, the same as marked
on the card panels.
Table 19 LSQ1SUPA0 (LSQM1SUPA0) supervisor engine specifications
Item
Service interface
Interface transmission
rate
Cables and max
transmission distance

LPUs

The S7508E-X switch supports various LPU models. The number and type of interfaces provided by an
LPU depend on the LPU model. For the transceiver modules that each LPU supports, see
modules."
NOTE:
The model of a card is LSQM-prefixed on the card package and LSQ-prefixed on the card panel. For
example, LSQ1FP48SA0 and LSQM1FP48SA0 identify the same card. When you order a card, refer to
the card by its LSQM-prefixed model. In this chapter, the card models are LSQ-prefixed, the same as
marked on the card panels.
LSQ1SUPA0 (LSQM1SUPA0) supervisor engine
•
One console port for local or remote dialup configuration management
•
One 10/100/1000BASE-T interface for management and upgrade
•
Console port—No greater than 1 15200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface—10/100/1000 Mbps
•
Console port—Common asynchronous serial interface cables, max transmission
distance of no greater than 15 m (49.21 ft)
•
10/100/1000BASE-T interface—Category-5 twisted pairs, max transmission
distance of 100 m (328.08 ft)
63
"Transceiver