Table of Contents
Advertisement
3.
Use Telnet, web or SNMP to access the IRF fabric from the network management station. (See the
Fundamentals Configuration Guide.)
4.
Verify that you can manage all member switches as if they were one node.
5.
Display the running status of the IRF fabric by using the commands in
Table 7 Displaying and maintaining IRF configuration and running status
Task
Display information about the IRF fabric
Display topology information about the IRF fabric
To avoid IP address collision and network problems, configure at least one multi-active detection (MAD)
mechanism to detect the presence of multiple identical IRF fabrics and handle collisions. For more
information about MAD detection, see IRF Configuration Guide.
Command
display irf
display irf topology
31
Table
7.
Advertisement
Table of Contents
Troubleshooting
