Installing A Cfp Module; Connecting An Sfp+/Qsfp+/Qsfp+ To Sfp+ Cable - H3C S7508E-X Installation Manual

4. Connect the fiber to the module. For the installation procedure, see "Connecting your switch to the
network."
Figure 20 Installing an XFP/SFP+/SFP/QSFP+ module

Installing a CFP module

1. Wear an ESD wrist strap and make sure it makes good skin contact and is well grounded. For
more information, see
2. Unpack the CFP module. Do not touch the golden finger of the module.
3. Holding both sides of the module, gently push the module into the slot until it has firm contact with
the slot. See
4. Fasten the captive screws.
5. Connect the fiber to the module. For the installation procedure, see "Connecting your switch to the
network."
Figure 21 Installing a CFP module
(1) Gently push the module into the slot

Connecting an SFP+/QSFP+/QSFP+ to SFP+ cable

Use SFP+ cables to connect SFP+ ports, QSFP+ cables to connect QSFP+ ports, and QSFP+ to SFP+
cables to connect QSFP+ and SFP+ ports. All these cables are hot swappable.
To connect an SFP+, QSFP+, or QSFP+ to SFP+ cable:
"Attaching an ESD wrist
Figure 21.
2
1
strap."
2
(2) Fasten the captive screws
25