Default Setting And Erasing; Exit Programming - Linkcom link smile User Manual

Parameter Value
70 uu
uu – transmission signaling level to the line, range -4 to -16dBm. You insert desired level, uu=04 is -
4dBm, uu=10 is -10dBm ...

5.7. Default setting and erasing

Parameter Value
8# #
This setting does not influence 1 and 2 (numbers stored in memory)
Parameter Value
81
82
83
84
85
86
87
80
The parameters 81 and 82 will delete all numbers stored in memories for buttons.
Attention: the deletion is non-reversible!!! Numbers must be programmed again.

5.8. Exit programming

Parameter Value
9
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
Description
Transmission signaling level in [-dBm]
(04-16)
Description
Default setting
Description
Deletes all numbers in group 1
(Day mode)
Deletes all numbers in group 2
(Night mode)
Default settings only for parameters 3x
Default settings only for parameters 4x
Default settings only for parameters 5x
Default settings only for parameters 6x
Default settings only for parameters 7x
Default settings only for parameters 0x
Description
Enf of programming
Default
10
Default
execute
Default
Default
Copyright © 2011 – Linkcom – All rights reserved
18