Parameter Description; Direct Numbers Dial - Memories; Relay - Linkcom link smile User Manual

5

Parameter description

.
5.1. Direct numbers dial – memories
Parameter Value
1 tt nn...
tt – button number (memory), always has 2 digits [01-99]
nn – telephone number up to 24 digits to be stored. Refer to the table for other choices. The number
stored in parameter 1 is the number for the first group or the number for Day mode.
Parameter Value
2 tt nn...
tt – button number (memory), always has 2 digits [01-99]
nn – phone number up 24 digits to be stored. Refer to the table for other
choices.
Numbers saved in parameter 2 are numbers of second group, or numbers
Night mode.
Default settings doesn't erase as same as changed those saved numbers.
Note:
The switchover to Day/Night mode remains set in the unit even after line disconnection.
For the Smile DoorPhone, tt is always 01

5.2. Relay

Parameter Value Description
31 r m
r – relay number [1-2]
m=1 relay mode – relay will close on command or password for ss period (used for electrical locks, gate
opening, etc.)
m=2 button mode–(activated by button press, external bell).
Parameter Value
35 r aa
36 r cc
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
description
nn=destination Number. tt=button
number (01)
Description
nn=destination Number. tt=button
number (01)
Relay mode
Description
First code aa from phone for relay
activating r (00-99,*0-*9)
Second code aa from phone for relay
activation r (00-99,*0-*9)
description
Default
-
Default
-
Default
11
Default
1 55
1 50
Copyright © 2011 – Linkcom – All rights reserved
dial
0 - 9 0 - 9
# #
* **
Flash * #
Pause * 0
description Dial
0 - 9 0 - 9
# #
* **
Flash * #
Pause * 0
of
10