Place Intercom Call To Preconfigured Intercom Number - Cisco DX600 series User Manual

Intercom Calls
• Listen to the caller with your microphone muted (you can hear the caller, but the caller cannot hear you).
• End the intercom call by tapping End Call with the intercom call in focus. Take this action if you do
not want to hear the message.
• To talk to the caller, tap the active intercom button and use either the handset, headset, or speaker. The
intercom call becomes a two-way connection (connected mode) so that you can converse with the caller.
When you use the intercom feature, be aware of the following:
• From an intercom line, you can only dial other intercom lines.
• You can use only one intercom line at a time.
• When monitoring or recording of your active call is taking place, you can receive or place intercom
calls.
• You cannot place an intercom call on hold.
If you sign in to the same phone on a daily basis with your Cisco Extension Mobility profile, ensure that
Note
your system administrator assigns the phone button template that contains intercom information to this
profile and assigns the phone as the default intercom device for the intercom line.

Place Intercom Call to Preconfigured Intercom Number

Procedure
Step 1 Tap a dedicated intercom line.
Step 2 After you hear the intercom-alert tone, begin speaking.
Place Intercom Call to Any Intercom Number
Procedure
Step 1 Tap a dialable intercom line.
Step 2
Enter the intercom target number or tap a speed-dial number for your target.
Step 3 After you hear the intercom-alert tone, begin speaking.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
32
Calling Tasks
OL-28931-01