Cisco DX600 series User Manual page 20

Answer Call
If you want to...
Answer with a headset
Answer with the speakerphone
Switch from an active call to answer a
new call
Answer by using call waiting
Send a call to a voice message system
Autoconnect calls
Retrieve a parked call on another phone
Use your phone to answer a call that is
ringing elsewhere
Answer a call on your mobile phone or
other remote destination
Tips
• If parties on a call hear a beep, the call may be monitored or recorded. Contact your system administrator
for more information.
• If you work in a contact center or similar environment, you can create, update, and delete your own
prerecorded greeting that plays automatically if Agent Greeting is configured on your phone. For more
information, contact your system administrator.
• A Call Chaperone user cannot answer an incoming call while calls are chaperoned.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
6
Then...
Press if it is not lit. Or, if
The phone selects the ringing line automatically. For the
Note
option to select the primary line each time, contact your
system administrator.
If you are using a wireless headset, refer to the wireless headset
documentation.
Press , or tap Answer.
Note The phone selects the ringing line automatically. For the
option to select the primary line each time, contact your
system administrator.
Tap Answer.
Tap Answer.
Tap Divert.
Use AutoAnswer.
Use Call Park, Directed Call Park, or Assisted Directed Call Park.
Use Call Pickup.
Set up Mobile Connect and answer your phone.
If you answer a call on your mobile phone, and you have
configured up to four IP Phones as shared lines, the additional
phones stop flashing when you answer the call.
Calling Tasks
is lit, tap Answer.
OL-28931-01