Place Call Using Name, Number Or Address; About Placing Calls - Cisco Webex DX70 User Manual

Video Calls

Place Call Using Name, Number or Address

1
Tap the green Call button.
3
Key in a name, number or address. Possible
matches and/or suggestions will appear as you
D1510422 User Guide
type. If the correct match appears in the list tap that
Cisco Webex DX70, DX80
Produced: September 2018 for CE9.5 match, otherwise keep typing.
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Tap the Search or Dial field. This will invoke the
keyboard
4
When you have typed or located whom to call,
tap either of the green Call buttons to place the
call.
11

About Placing Calls

You may call someone who is not
listed in your list of contacts by keying
in their name, address or number
using the virtual keyboard appearing
on the display.
Anyone you have previously called, or
who has called you, will appear in the
Recents list and you may transfer any
of them to your list of Favorites. This is
described in the section Contacts.
Sometimes you may be urged to enter
numbers during a call, typically to
reach extensions or to provide a pin
code.
Tap Touch Tones (this button appears
as soon as the call is placed) to invoke
the keypad needed for this.
Note that Recents can be cleared
from the web interface only.