Unlock Screen; Place Emergency Call From Lock Screen; Add Pin - Cisco DX600 series User Manual

Desktop collaboration experience
Hide thumbs Also See for DX600 series:
Table of Contents

Advertisement

Unlock Screen

The Lock screen displays the date and time, the number of unread email messages, the number of recently
missed calls, the number of new voice messages, and the number of upcoming events for the next 24 hours.
The number of unread email messages, and the number of upcoming events, are displayed only if you
Note
have configured a Microsoft Exchange account.
Use a PIN or password to unlock your phone. Your PIN or password is stored on the phone, and it is not the
same as a PIN or password for any other service.
You can set the amount of time that your phone can be inactive before the screen locks. Your system
administrator may disable the screen lock during your work hours.
By default, the home screen is displayed when you unlock your phone. You can configure your phone to
unlock to the Call application.
Unlock Screen
Procedure
Step 1
Enter your PIN.
Step 2
Press # or tap Unlock.

Place Emergency Call From Lock Screen

Procedure
Tap Emergency call.

Add PIN

Procedure
Step 1
When you are prompted to set a PIN or password, tap Ok.
Step 2
Tap PIN.
Step 3
Enter a PIN and tap Continue. Your PIN must be at least four digits.
Step 4
Enter your PIN again and tap OK to confirm your PIN.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
46
Phone Customization and Settings
OL-28931-01

Advertisement

Table of Contents
loading

Table of Contents