Table of Contents
Advertisement
User Options Web Pages
Create Access List
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Select User Options > Mobility Settings > Access Lists.
Step 3
Select Add New.
Step 4
Enter a name to identify the access list and a description (optional).
Step 5
Select whether the access list allows or blocks specified calls.
Step 6
Select Save.
Step 7
Select Add Member to add phone numbers or filters to the list.
Step 8
Select an option from the Filter Mask drop-down list. You can filter by directory number, calls with restricted
caller ID (Not Available), or calls with anonymous caller ID (Private).
Step 9
If you select a directory number from the Filter Mask drop-down list, enter a phone number or filter in the
DN Mask field.
You can use the following wildcards to define a filter:
• X (upper or lower case): Matches a single digit. For example, 408555123X matches any number between
4085551230 and 4085551239.
• !: Matches any number of digits. For example, 408! matches any number that starts with 408.
• #: Used as a single digit for exact match.
Step 10 To add this member to the access list, select Save.
Step 11 To save the access list, select Save.
Add New Remote Destination
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Select User Options > Mobility Settings > Remote Destinations.
Step 3
Select Add New.
Step 4
Enter the following information:
• Name: Enter a name for the mobile (or other) phone.
• Destination Number: Enter your mobile phone number.
OL-28931-01
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
Set Up Phone and Access List for Mobile Connect
61
Advertisement
Table of Contents
