Table of Contents
Advertisement
Calling Tasks
Switch From Active Call to Answer Ringing Call
Procedure
Perform one of the following actions:
• Tap Answer.
• If the call is ringing on a different line, select that line.
The phone places the active call on hold and the selected call connects.
Remove Call From Hold on Current Line
Procedure
Step 1
Highlight the appropriate call.
Step 2
Tap Resume.
Multiple Lines
Your administrator can configure multiple lines for your phone.
Select a Line
Procedure
Tap a line to select it.
The call list for the line is displayed, and you can place calls on that line.
Enable All Calls on Primary Line
You can configure your phone so that all incoming calls display on the primary line call list. You can then
choose to answer an incoming call for a secondary line on the primary line, or you can choose to select the
secondary line before answering.
If you answer an incoming call on the primary line, the next call that you place will be on the primary line by
default. If you answer a call on a secondary line, the next call that you place will be on the secondary line by
default. If you select a line before placing a call, the call is placed on the line that you have selected.
OL-28931-01
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
Multiple Lines
35
Advertisement
Table of Contents
